Swatch Once Twice Again Ae1200 Mdv106 G Shock- Skx Sistem51 Turtle Snzg-

Issues With Your Automated Scout? What'south The Cause And How To Solve It?

If you are unlucky, you might see some bug with your automatic or mechanical watches.

Depending on the severity, the steps to correct information technology will differ. Some of them can be severe that require a total service while some of the minor bug can be resolved by yourselves.

Hither, I've listed some of the common bug with automatic watches , what causes these problems and how to solve them.

Table of Content (Click the subtitle to become straight to the section):

1. Automated Spotter Stopped Working While Wearing It
2. Automatic Watch Stopped Working Later on Taking It Off / Power Reserve Problem
3. Automatic Sentinel Stopped Working Afterward Dropping It
4. Automated Picket Running Deadening Or Fast
5. Fogging Within Lookout
6. Infinitesimal Hand And 2d Hand Not Perfectly Aligned
7. Automatic Picket Not Winding
8. Date/Day Display Don't Change At The Right Time

As great as they are, automatic watches are not complimentary of problems. By having some noesis about what nosotros should and shouldn't practise to information technology, we will be able to avoid costly repairs. (shown above is the gorgeous Seiko SARB033)

1- Automatic Sentry Stopped Working While Wearing It

Ever having problem with your sentry stopped working while wearing information technology? If its a quartz lookout man then most probably the battery is expressionless but automatic watches don't have any battery and supposed to be powered by your motility right?

Well you are correct merely there are some reasons why a watch can go dead. At that place are 3 mutual causes of why an automatic watch tin cease working:

Cause 1 – Not Enough Power Reserve

Something that most people don't know it the scout might non have enough power reserve fifty-fifty though you are wearing it regularly.

Simply aren't automatic watches are recharged by wrist move?

The reason is because you are not active enough to wind the mainspring fully.

Try this: take a watch with an exhibition caseback and shake it to see whether the cocky-winding rotor rotates or not. Information technology is easy for the rotor to moves?

Some watches can have a very smooth rotor that rotates lively fifty-fifty with a slight movement. But some watches take rotor that requires more effort for it to rotate.

Due to this, just wearing your automatic sentry to role might non be enough to wind it fully. Consider wearing your sentry when y'all are jogging, swimming or going to gym (if your watch is a sports watch.

Don't do this with a dress watch though. You don't desire to scratch that pretty affair lol).

Some other method that I like and personally use is to manually air current your lookout man once a while. This will make sure the watch has full ability reserve equally just wearing information technology might not be able to recharge information technology fully.

Just be conscientious to not over-air current information technology or air current information technology as well often equally you might break the delicate parts inside.

A video showing how to wind an automatic sentry. Shown in the video is the gorgeous Rolex Submariner

Cause ii – Magnetic fields

Exposing your watch to strong magnets such as in speakers, fridges, etc will magnetized the steels inside your sentry.

The result?

The small steel components within your watch will tend to stick to each other or repelling each other (depending on the pole) and reducing accuracy of the watch (the watch will run slower or faster).

Only for extreme case of magnetization, the watch volition completely cease. Bring you watch to a sentry maker to cheque for magnetization and and then demagnetize the sentry.

Cause 3 – Serious Problems With The Motion

If your sentinel all the same stops fifty-fifty though y'all wind it everyday and no magnetization is known, then at that place could exist a serious issue with your lookout man'southward motion . Bring the lookout man to a sentry maker and let him check the watch for any problem and servicing.

If the watch is withal under warranty, you tin bring it to the seller for inspection or replacement. Deport in mind that full servicing can toll some money depending on the sentry brand and severity.

Popular and affordable movements such as Swatch ETA, Seiko and Orient movements are easier to exist serviced by just about any competent watchmaker. Costs of parts are as well cheaper for these.

Only if you accept a unique in-business firm move by luxury or independent brands, then the official service center is the most recommended avenue. I certainly won't trust my $10k Rolex on whatsoever normal watch shop…. yous get what I mean right? =P

(Read also the 10 Best Affordable Automatic Watches Under $200 – who said that automatic watches need to be expensive?)

two- Automated Lookout man Stopped Working Afterwards Taking It Off / Ability Reserve Problem

You clothing your watch for some time, then put it off and when yous want to wearable information technology back, it is expressionless? How could this happen?

The reasons for this to happen are exactly the same as the first problem above i.e lack of power reserve (y'all can refer above for its causes and solutions). Some other thing to annotation is the power reserve of you sentry.

If you lot are paranoid virtually your watch's power reserve, then become one with a power reserve indicator like this Orient Star Retrograde. As you tin see, the pinnacle subdial displays its remaining power reserve which is really handy

Even though your watch's move might have xl or 50 hours of power reserve, the watch might stop working fifty-fifty before that.

Why is this and then?

One thing that we need to know is the power reserve of any automatic is the time for the scout to stop working after it's been recharged to full capacity.

Equally I've stated above, usually, wearing it for a twenty-four hour period (normal 10 to 12 hours on the wrist) volition not be enough to charge the sentinel to full.

Not to mention most watches don't have power reserve indicator which can exist a huge help in telling the ability reserve capacity at any moment.

In fact, most experience owners state that the remaining power reserve of the watch is well-nigh 2 or three times the last duration we wear it.

So for case, if I'1000 wearing my watch for 12 working hours today, information technology will tick for 24 to 36 hours later on I put it down.

What should we do then?

For me, I've ever manual/hand-wind my auto watches before I utilise them. A few turns (15-twenty) is enough to start the motion and then I just wear information technology.

The key is to NOT only depend on the cocky-winding of the movement. As mentioned above, the rotor movement might not be sufficient especially if y'all're working a desk task without many wrist movements.

In addition, this will continue the accurateness high as the watch has more juice in information technology.

What if I've tried that but it didn't work!

So there could exist a bigger problem in the watch. Try to handwind it for 40-50 crown rotations and lay the watch downwards. This will make the mainspring full of power reserve.

Keep record of what elapsed 60 minutes the watch stops. If it'south less than the published power reserve for that movement, there could be a problem with the movement itself.

At this point, nosotros should bring information technology to a watchmaker for him to have a look at it. Depending on the instance, we might simply demand a servicing, cleaning, or a change of the mainspring.

CHIYODA Double Scout Winder

Past the way, it might also be a adept idea to invest in awatch winderwhich is agreat alternative for those that don't want to have to reset or handwind their watches before they utilize it.

The watch winder functions by rotating the watch via a motor. Just place the scout inside the winder's slot and plug it in.

It will then rotate the picket, and the self-winding rotor inside information technology to charge the power reserve.

The watch winder is a nifty style to ensure the power reserve is however full without u.s. having to practise annihilation. It besides foreclose from problems due to winding (which can happen to some ETA movements).

By the style, did I mention the watch winders can likewise be a nice storage box for your watches? =)

I like to too add that theSistem51 movement past Swatch boasts a 90 hours power reserve. For those that don't want to spend on a winder or just desire a watch with corking power reserve, you might want to check the Sistem51 watches.

three- Automatic Watch Stopped Working Later Dropping It

This crusade is easier to sympathise. You drop the watch, it get into a sudden impact and all of a sudden information technology goes dead . Well chances are your scout might have some internal damage in information technology.

The inside of an automated or mechanical watch is fabricated of hundreds of parts that piece of work seamlessly to run the watch. These parts tin exist as small every bit 1 mm in thickness or diameter. Any sudden bear on could put these parts out of place or worse, even break them.

The role that are more prone to impact harm is the balance bicycle. The pivot/staff of the bicycle residuum is a very critical role considering it holds the weight of the balance wheel which is continuously moving at a loftier speed.

This Seiko SARB017 (or Alpinist) has a built in shock resistance system developed by Seiko – i.eastward Diashock – to protect its balance wheel jewel from astringent bear upon damage. All practiced outdoor or diver'southward watches should always accept this to protect it from costly repairs

Nigh damages due to impact is considering of broken wheel remainder pivot and/or its gem.

If your watch stopped working afterwards dropping it, try hear if there is any sound in the lookout man to know whether your residuum wheel is functioning or not.

If your watch has exhibition caseback, yous can just ostend this by looking directly at the rest wheel to spot anything wrong with it. The only solution is to bring the lookout to a watch maker for a repair.

Some shock protection system has been designed to protect automatic/mechanical watches from bear upon damage, specifically the jewel.

Incabloc (from Swiss), Diashock (Seiko) and Parashock (Citizen) are some of the stupor protection systems that have been devised by watch companies. All of them have some sort of jump at the jewel pivot of the rest bicycle to protect it from bear on force.

If you are a rough person that tends to get his watches damaged this mode, you lot might wanna cheque out those watches with a shock protection organisation in them.

Residual wheefifty is the part inside an automatic lookout which is most prone to impact damage

4- Automatic Sentinel Running Deadening Or Fast

Automatic and mechanical watches will always run slow or fast after some time. The most accurate watches are the COSC certified chronometers that tin can take a -4 or +6 seconds per twenty-four hours accuracy.

Other watches tin can have a lesser accurateness than this and you lot accept to bank check the official numbers by your watch manufacturer. But mostly the accuracy values is inside +/-25 seconds a mean solar day for a low end range of automatic watches.

If your sentinel have a lesser accurateness than this then this indicates a problem with your watch. There are 5 reasons why automatic watches volition run slower or faster than acceptable accuracy:

Crusade 1 – Not Enough Power Reserve

Accuracy of a movement is tracked at maximum power reserve, after a watch has been fully wound. If a lookout man is non fully wound (or ability starved), and so the accuracy volition be slightly lesser than what your watch manufacturer advertised.

Try to at least wind information technology once a while for it to accept a total ability reserve. You volition find a difference with the accuracy compared to when the picket merely relied on wrist motility.

Cause ii – Temperature

Some other important thing that well-nigh people don't know is that your watch have different accuracy in dissimilar temperatures.

Too hot (more than 38 degrees Celsius) or besides cold (less than 15 degrees Celsius) will affect the metal parts inside the sentinel. Steel will expand at high temperature while contracting when it'due south besides cold. Coldness can also impact the lubricants inside the watch.

Nigh of the times it's the coldness that affect the accurateness since it will accept a very high temperature to brand a difference – non all of us alive in scorching hot desert.

Just coldness especially during wintertime can change how the watch behave. It volition run slower a bit if exposed to cold weather and might have shorten power reserve. Just the result of coldness will not exist credible if you lot are wearing the watch though as our torso temperature will heat the sentry upwardly.

Crusade 3 – Position

Watch movements accurateness is highly affected by the balance wheel and escapement. These systems tin exist affected past the position of the watch due to gravity. Examples of watch positions is flat with dial/sentinel face looking up, dial downwards, vertical positions with different locations of crown.

Equally y'all can suggest, the punch upwards or down is basically when y'all put the spotter on a tabular array/cupboard after wearing information technology during the twenty-four hours. The vertical positions are during wearing the watch.

During each of these positions, the effect of gravity volition cause the balance wheel to take a slight change in move causing some inconsistency. Most watches are most authentic at one or two of these positions.

When you put the watch at other positions, the accuracy will endure. This is the main reason why chronometer is highly sought afterward – they are designed and adjusted to be accurate for all positions.

My suggestion is to proceed track of what position your watch is well-nigh accurate and what position information technology isn't. You can apply apps to help with this. Just search for watch accuracy in appstore/playstore.

Normally these apps will take you ready the watch to accurate time in the commencement and then y'all tin record the time at intervals and information technology volition report the accuracy in seconds per day. By doing this, you will know what position your sentry is most accurate and apply it consciously.

Cause four – Magnetism

Equally stated above, magnetism of picket can greatly reduce accuracy. It's highly recommended to avoid placing your picket next to any digital or electronic devices to avoid magnetism.

Case v – Due For Service

Just similar a car, automatic and mechanical watches also need to be serviced after some time based on manufacturer'due south recommendation. This is one of the biggest flaw of automatic watches versus quartz watches.

Because of the high number of moving parts inside information technology, automatic watches need to be serviced to proceed the movement well oiled and also to conform the rest cycle and escapement. Generally, 3 to 5 years are the normal service interval. Don't skip this if you want to keep that sentry as heirloom for your grandson =)

(Read also the 30 Best Automatic Watches Nether $i,000)

v- Fogging Inside Watch

Some watches especially swoop watches has screw down crown for added protection. The dial window and caseback is easily guarded from h2o ingress by gasket and seals.

Since the crown is used for transmission winding and setting the time, it has a staff that is continued to the movement inside the spotter. The small-scale gap between the staff and the casing is the perfect identify where water can make it.

Spiral down crown solves this problem by screwing the crown into the case, and eliminating whatsoever possible gaps between them.

Shown above is the Seiko SKX009 with its crown unscrewed. Remember that screw downwardly crownsMUST ALWAYS exist screwed properly at all times even when storing the watch – except when using the crown of course.

But information technology has to be reminded that the spiral downwardly crown must always be screwed in tightly when you are using the lookout for whatever activity especially swimming or diving . The crown must not be operated while underwater for, well.. the reason is obvious correct.

Information technology is also recommended to go your swoop picket to be tested for water resistance later a few years. It is worried that the gasket and seals of the scout has already worn out.

If you are a serious diver, then it is very of import to ensure your watch is ever in perfect water resistance condition to avoid any unwanted problems.

vi- Minute Hand And Second Hand Not Perfectly Aligned

A common issue with automatic watches is the minute paw and second hand are not perfectly aligned.

For example, when the second hand is at the 12 o'clock position, the minute hand is not perfectly on acme of any infinitesimal marker.

An example of how not setting the fourth dimension correctly can crusade the minute hand not sitting directly on the minute marker when the second hand is at 12 o'clock. By the way, there's no problem with the sentry and this can be stock-still easily.

This is caused past improper setting of the time when first bringing the watch from stop.

To be honest, this does not hateful there'south any problem with the sentinel. The spotter is running fine only to people with a smashing eye for particular, this is non acceptable.

Personally, I besides don't like this, but not because it doesn't look nice. For me, a lookout need to exist easy to tell and having a non-perfectly aligned minute hand makes the fourth dimension telling unusual and weird.

And then what do I practise to avoid this trouble?

I'll finish the 2d manus exactly at the 12 o'clock position and then move the minute hand to be perfectly on top of the minute marker.

While this is easy to exercise with a hacking motion, it'southward a flake more hard with a non-hacking movement (such as the 7S26 inside Seiko'southward SKX watches).

For those movements, we need to exist more precise equally the 2nd paw does non cease. And then the moving of the minute hand need to be on-point when the 2nd paw passes the 12 o'clock.

vii- Automatic Scout Not Winding

If you feel at that place'southward a problem with the hand-winding function, endeavor to let the watch stop on its own.

So pick it up and requite it some hand-winding. The watch should first after a few turn of winding the crown. If information technology isn't, this means there'southward a problem with the movement and a visit to your watchmaker is need to resolve information technology.

8- Date/Day Display Don't Change At The Correct Time

A common issue that I've personally faced is the date and day indicator don't modify correctly.

I'g sure those using analog watches with either 1 of this feature will feel the date/mean solar day suddenly alter around apex.

The just reason for this is incorrect setting of the day/date.

We demand to think that automated watch is not similar an electronic scout. It does not know the current time (i.e am or pm). Which is why the twenty-four hour period/date volition simply change once the hour hand completes ii rotations (or 24 hours).

So what'south the correct way of setting the 24-hour interval and engagement display?

Below is the pace past step guide on how I change my engagement/24-hour interval display on my watches:

1. When outset picking up the spotter, move the time until the hour hand is at 12:00. Run into if the 24-hour interval/appointment change or not.
2. If the day/date alter – means the spotter just enters AM mode
3. If the day/appointment does not change – means the watch just enters PM manner
4. From there, you can gear up the fourth dimension according to your current time.
5. For example: if you motion the hour hand to 12:00 > 24-hour interval/date modify means the sentinel just enters AM mode > but y'all're in the afternoon > move the hour hand a full rotation (12 hours) to enter PM style > then gear up time and day/date.

[UPDATE]

Currently I don't apply the method in a higher place when setting my watches and prefer another method. Below are the steps of this method:

1. Modify the date and 24-hour interval to One day earlier the current 24-hour interval. Due east.g if today is May 15 Sunday, and so we demand to modify the date to 14 and the twenty-four hours to Sabbatum.
2. Move the time needle to 12:00 and detect the alter in date/24-hour interval window.
3. If at that place is no alter, that means the lookout'due south internal time is in PM style. Another rotation of the picket will change information technology into AM fourth dimension of the electric current day. We tin can adjust accordingly from hither.
4. If the day/date change, it means the watch just enter today's fourth dimension in AM mode. Over again, we demand to suit the watch accordingly.

Picket the video about for the summary of the common problems with automatic watch

End Thoughts

Automatic/mechanical watches are a delicate piece of applied science and should always be treated delicately. Not to mention they cost way more normal quartz watches. And so I'd put them as the fancy sports motorcar – expensive but have to exist properly taken care off lol!

Thus, it is of import for all automatic watch owners to know what tin exist done and what cannot be done to foreclose from any unwanted and plush problems to their prized watches.

Do permit me know if you need whatever assist with the issues above. I'll attempt my best to help you out.

I hope that you guys will find this post beneficial to yous. Permit me know if y'all accept whatever comments or thoughts on this matter.

Don't forget to share this article if you similar it =)

Till side by side time. Cheers!

Isaac

armstrongfrour2001.blogspot.com

Source: https://automaticwatchesformen.com/5-common-problems-with-automatic_mechanical-watch

Share this post